Gbox & CCcam %100 çalışıyor

[cilginyurekli]

Gbox & CCcam %100 çalışıyor
ARKADAŞLAR .. DAHA ÖNCE DENEDİĞİM Bİ ÇOK SCRİPTDE GBOX VE CCCAM TÜM İMAJLARDA BERABER ÇALIŞTILAR ANCAK GBOX 2.25C KULLANILDIĞINDA CCCAM ÖNCELİK ALIYOR VE KANALLARI AÇIYORDU GBOX UN KANAL AÇMASINA İZİN VERMİYORDU GBOX 2.1B KULLANILDIĞINDA İSE TAM TERSİ OLUYOR VE 2.1B KANALLARI AÇIYOR CCCAM İN AÇMASINA İZİN VERMİYORDU...
YUKARIDAKİ SCRİPTLERDE İSE DENEMELERİM SONUCU HER İKİ EMUNUNDA YANİ GBOX VE CCCAM İN KANALLARI PİNG ÖNCELİĞİNE GÖRE AÇMASINI SAĞLIYOR YANİ İKİ EMUDA KANAL AÇIYOR TAMAMEN TESADÜFEN BULUNMUŞTUR HANGİ EMUDAN GELEN KART DAHA HIZLI İSE ONUNLA KANALLAR AÇILIYOR...

for NABILO V0.8
-------------------
This is for startCAM VAR/BIN
CHMOD 755

Kod:

/var/bin/CCcam_2.0.4 &
/bin/sleep 1
/var/bin/CCcam_2.0.4 &
/bin/sleep 1
/var/bin/gbox21bp2048 &
/bin/sleep 1
/var/bin/gbox21bp2048 &
/bin/sleep 1
/var/bin/pmthelper &
Kod:

# osd-name n = <softCAM OSD Name>
# emulator n = <softCAM Description>
# camd n = <CAMD binary>
# daemon n = <daemon binary>;<daemon binary>;<daemon binary>; etc etc
# kill n = <extra process that needs killing>;<extra process that needs killing>; etc etc
# sleep n = <time in seconds to wait between daemon launches
# zap-sleep n = <time in seconds to wait between first daemon launch and zap>
#
# Where n is the softCAM number 1 - 10
#
osd-name 1 = Common Interface
emulator 1 = Common Interface
camd 1 =
daemon 1 =
kill 1 =
sleep 1 =
zap-sleep 1 =
osd-name 2= CCcam & Gbox
emulator 2= CCcam & Gbox
camd 2=
daemon 2= CCcam_2.0.4;CCcam_2.0.4;gbox21bp2048;gbox21bp2048; pmthelper
kill 2=
sleep 2= 1
zap-sleep 2= 1
# End of SoftCam List
campath = /var/bin/
defaultSoftCam = 2
# Remembered providers and channels

for EDG-NEMESIS 3.2
------------------------

Kod:

#!/bin/sh
#emuname=CCcam & Gbox
#ecminfofile=ecm.info
remove_tmp () {
rm -rf /tmp/gbox.ver /tmp/sc* /tmp/pid.info /tmp/share.info /tmp/share.onl
rm -rf /tmp/ecm.info /tmp/emm.info /tmp/pmt.tmp /tmp/debug.txt /tmp/online.log
rm -rf /tmp/csonline.txt
}
setup_gbox () {
set -- $(/sbin/ifconfig | grep "eth0" -A 1 | grep "inet" | cut -d " " -f 12 | cut -d ":" -f 2)
sed 's/YOUR-DM IP/'$1'/g' /var/***s/gbox_cfg.orig> /var/***s/gbox_cfg
sed 's/YOUR-DM IP/'$1'/g' /var/***s/cwshare.cfg.orig> /var/***s/cwshare.cfg
sed 's/YOUR-DM IP/'$1'/g' /var/***s/cs2gbox.cfg.orig> /var/***s/cs2gbox.cfg
}
case "$1" in
start)
remove_tmp
setup_gbox
sleep 1
if [ -e /var/bin/cs2gbox ];then
/var/bin/cs2gbox &
sleep 1
fi
/var/bin/CCcam_2.0.4 &
sleep 1
/var/bin/gbox21bp2048 &
sleep 1
/var/bin/gbox21bp2048 &
sleep 1
/var/bin/pmthelper &
sleep 1
;;
stop)
touch /tmp/emu.kill
killall -9 gbox21bp2048
killall -9 cs2gbox
killall -9 pmthelper
killall -9 CCcam_2.0.4
sleep 2
remove_tmp
;;
*)
$0 stop
exit 1
;;
esac
exit 0
for GEMINI
----------

Kod:

CAMNAME="CCcam-Gbox"
USERNAME=""
ZAPTIME=6
CAMID=9515
DVBSET=0
INFOFILE="ecm.info"
INFOFILELINES=
# end
remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}
case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
remove_tmp
/var/bin/CCcam_2.0.4 &
sleep 1
/var/bin/CCcam_2.0.4 &
sleep 1
/var/bin/gbox21bp2048 &
sleep 1
/var/bin/gbox21bp2048 &
sleep 1
/var/bin/pmthelper &
sleep 1
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
killall CCcam_2.0.4 gbox21bp2048 pmthelper 2>/dev/null
sleep 2
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac
exit 0

for PLI-HELENITE
--------------------

Kod:

#!/bin/sh
CAMNAME2="Gbox-CCcam"
PATH="/sbin:/bin:/usr/sbin:/usr/bin"
case "$1" in
start)
echo "[SCRIPT] $1: Starting $CAMNAME2"
pli_pmthelper
/var/bin/gbox21bp2048 &
/bin/sleep 1
/var/bin/gbox21bp2048 &
/bin/sleep 1
/var/bin/CCcam_2.0.4 &
/bin/sleep 1
/var/bin/CCcam_2.0.4 &
;;
stop)
echo "[SCRIPT] $1: Stopping $CAMNAME2"
touch /tmp/gbox.kill
killall pli_pmthelper
;;
*)
$0 stop
exit 1
;;
esac
exit 0
pmthelper ----> var/bin ----> chmod 755
gbox21bp2048 -------> var/bin chmod 755
CCcam_2.0.4 ------> var/bin chmod 755
nemesis gemini nabio pli imajlar için cam.sh dosyaları -----> var/script chmod 755
Cccamcanelinfo --> CCcamprio --> CCcam providers ---> var/etc chmod 644
PS : THIS SCRIPT LETS YOU USE TWO EMU AT THE SAME TIME .
....NORMALY DREAMBOX USE ONE EMU LEAD BUT THIS SCRIPT KILLS THIS PROBLEM AND LET YOU USE WHICH EMU HAS GOOD PING TIME !!.... IF YOU DON'T USE THIS SCRIPT GBOX 2.1B CLEAR CHANNELS BUT CCCAM CAN NOT !! .....IF YOU USE GBOX 2.25C CCCAM CLEAR CHANNELS BUT GBOX CAN NOT !!
SO THIS SCRIPT LET YOU USE TWO EMU AT THE SAME TIME AND USE IT WITH WHICH EMU'S PING TIME IS FAST FOR CLEARS THE CHANNELS.



[Üye Olmadan Linkleri Göremezsiniz. Üye Olmak için TIKLAYIN...]

[dijitalevren]

bu bir kopya aynısı özmenada vardır neden alıntıdır diye yazmadınız...

[armanygio]

çok teşekkür ederim

[MaTRix2003]

deniyen oldumu calisiyormu??

[atsiz77]

simdi birde birtane c-line alabilirsek deneyebiliriz.

[faycall]

sdgbsgsbhhbhb

[semih er]

teşekkürler

[promax]

teşekürler inşallah çalışır